The AXi 2808/24 brushless outrunner with rotating drum and high power neodymium magnets is suitable for 400-500 sized models, and up to 1,300g/45.9oz in weight. The 2808/24 is probably about the most powerful and efficient outrunner available for outdoor 3D models up to 800g/28oz. If you are an accomplished R/C pilot looking to upgrade your outdoor 3D plane, look no further.
The hardened steel 4mm diameter shaft and is supported by two ball bearings, ensuring very good mechanical stability. Due to it's high torque characteristics this motor is capable of turning large propellers with a high level of efficiency and without the need for a gearbox.
A new feature in the AXi motor design is a provision for radial mounting (see picture). The optional radial mount set includes: mounting flange, propeller adaptor, securing collar, and screws.
The AXi 2808/24 with a 30A speed controller, 11.1V Li-Poly battery and a 10"x4.7" propeller is a great setup in 3D models up to 800g/28.2oz such as the Telink SU29 and Yak 55 3D EPP models and also performs efficiently in sailplanes up to 1,300g/45.9oz with 9"x5" folding propellers. The AXi 2808-24 is also suitable for flying wings like the MS Composit Maxi Swift with 9×5 folding propellers on 3s Li-Po packs.
Please note that the radial mount set is optional and not included with AXi brushless motors.
In the box: -
- Model Motors AXi 2808/24 Brushless Motor
- Specification and manual
- Mounting template
Not included with AXi 2808/24: -
- Optional radial mount set – includes radial prop driver (RMS2808)
- Optional prop holder (PH4 – Not required if using radial mount)
Made in Czech Republic.
Other AXi motors in this series:
AXi 2808/16, AXi 2808/20
Do not exceed the recommended propeller sizes.