RC Factory RS 352 EPP - 1.2m Version - Unpainted

The new RC Factory RS-352 with 1200mm (47") wingspan. This is the unpainted version – none of the parts have been printed. Kit contents are otherwise the same as the normal pre-painted version.

To complete the 1.2 metre RS-352 you will need the following items: -

• Appropriate glue (We normally use medium CA)
• 4 × 16g servos (The HS-81 or HS-65MG are good choices, but any similar servo will suffice)
• 5-channel+ receiver (2 x Aileron, 1 x Elevator, 1 x Rudder, 1 x Throttle)
• 200-400W power set. e.g. AXi 2808/24 (With PH4 prop adaptor) with a 1500-2200mAh 3s Li-Po and a 10×4.7 or 11×3.8 prop. The AXi radial mount set is not required for this model.

The build is similar to the Flash EPP models and the smaller RS-352. As with all RC Factory models, the build is very straight-forward and can easily be completed in one or two evenings. Please refer to the link below for PDF instructions.

For the standard pre-painted version of the larger 47" RS-352, please refer to the 47" RS-352 EPP listing.

Made in Czech Republic.

Next-day UK delivery with a one-hour delivery window (Communicated by SMS or Email) is available for £5.95 on all our model aeroplane kits and accessories. Or you can have your new aeroplane by mid-day the next day for just £9.95 – Just order by 3pm and choose the appropriate service in the list of shipping options in your basket. We also offer great shipping prices to European destinations on all items using the DHL Economy service for fast and secure delivery of your items. Worldwide Express shipping is available on all items but can be prohibitively expensive for model aeroplane kits due to their dimensions.

We ship worldwide from our UK warehouse.