Large version of the RC Factory SU-29 EPP model with 1200mm/47" wingspan, for 200-400W setups on 1600-2200mAh 3s Li-Poly batteries with 4×16g servos.
This large 1200mm span version of the EPP RC Factory SU-29 is a fully 3D capable foam model aeroplane with huge control surfaces. The cowl, two-piece undercarriage, control horns and aileron push-rods are included.
The RC Factory SU-29 is a gorgeous EPP foam model with a great colour scheme already applied at the factory and the construction is typical and simple of the existing models, resulting in a robust but light-weight and accurate airframe.
To complete the model you will need the following items: -
- Appropriate glue (We normally use medium CA)
- 4 × 16g servos (The HS-81 or HS-65MG are good choices, but any similar servo will suffice)
- 5-channel+ receiver (2 x Aileron, 1 x Elevator, 1 x Rudder, 1 x Throttle)
- 200-400W power set. AXi 2808/24 (With PH4 prop adaptor) with a 1,800-2,200mAh 3s Li-Po and a 10×4.7 or 11×3.8 slow fly propeller. The AXi radial mount set is not required for this model.
The build is similar to the Yak and the smaller existing SU-29. Kevlar thread for pull-pull is not included. Please refer to the link below for PDF instructions.
Spare Parts: -
Made in Czech Republic.
Next-day UK delivery with a one-hour delivery window (Communicated by SMS or Email) is available for £5.95 on all our model aeroplane kits and accessories. Or you can have your new aeroplane by mid-day the next day for just £9.95 – Just order by 3pm and choose the appropriate service in the list of shipping options in your basket. We also offer great shipping prices to European destinations on all items using the DHL Economy service for fast and secure delivery of your items. Worldwide Express shipping is available on all items but can be prohibitively expensive for model aeroplane kits due to their dimensions.