6s 2300mAh A123 Battery Pack in Triangular configuration (3-Tri + 3-Tri) produced with genuine A123 M1 cells from A123 Systems.
This pack is fitted with a Deans Ultra plug (female) and a JST-PQ (PolyQuest, Enerland, E-Tec, SharkPower) balance connector.
The pack can be fast-charged at 10A but should be balanced regularly to ensure a long service-life. The maximum charge voltage for this pack is 21.6 volts (3.6V per cell) and the minimum discharge voltage is 12V.
LiFePO4 batteries must be charged with a compatible charger, such as the Ultramat 14 Plus, Ultramat 16 or Ultra Duo Plus 40.
Nominal pack voltage: 19.8V
Fully-charged pack voltage: 21.6V
Recommended cut-off voltage: 15.0V (2.5V per cell)
Minimum voltage: 12.0V (2.0V per cell)
Do not charge above 21.6V
Please refer to the specification tab above for weight and dimensions of this battery. Some of our batteries come without plug unless otherwise stated (Please refer to "Discharge Plug" in the specification).
Important information about lithium battery shipping: Batteries are prohibited on all Air services, DPD Air Express, DHL Express services and all Royal Mail services (Click here for Royal Mail information). Batteries below 100Wh and where individual cells are below 20Wh, can be shipped by DHL Economy within Europe where the option is available in your basket. Within the UK, batteries can be shipped using the DPD carrier services. Please choose the appropriate option during checkout. If in doubt, please ask us first!
Technical Details for 6s 2300mAh A123 Battery Pack - Triangular
|Balance Plug Type||PolyQuest/Hyperion|
|Continuous Discharge (C)||30.0C|
|Continuous Current (A)||69.0A|
|Burst Discharge (C)||60.0C|
|Burst Current (A)||138.0A|
|Maximum Charge Rate (C)||4.3C|
|Maximum Charge Rate (A)||10.0A|