The new Clik R2 SuperLITE is a new design for the 2016/2017 indoor flying season. These super light-weight radio-controlled planes retain the superb flying characteristics, layout and construction of the existing Clik NG but bring three new colour schemes to help you stand out in the hangar! This time, RC Factory have gone all-in with the EPP and carbon-fibre construction, resulting in a light-weight, slow flying and most importantly a strong airframe for indoors. No depron has been used here and those accustomed to the confetti carnage of flying indoors will definitely appreciate that!
The side area of the fuselage has been increased slightly over the original Clik design and a T-canaliser has been added, resulting in improved knife-edge performance.
The Clik R2 SuperLITE uses the same gear as the existing Clik NG. A nice efficient low RPM motor with a light-weight speed controller and servos. Our optional power set includes a simple and budget-friendly propeller. The more serious pilots will want to upgrade to something like the PT Model 9×2.5 carbon-fibre propeller for smoother throttle responsiveness and a nice low pitch to keep things slow.
The weight of the constructed airframe without electronics is usually around 65 grams. AuW 120-130 grams.
Clik R2 Specifications
Wing span: 840mm/33"
Motor: 40-60W (We recommend the AT2202 1620kv)
Servos: 2×4.5 g, 1×6g
Propeller: 8×4 – 9×3.8
Download the manual
Next-day UK delivery† with a one-hour window (Communicated by SMS or Email) is available for £6.95 on all our model aeroplane kits and accessories above £41.95. Or you can have your new aeroplane by mid-day the next day for just £9.95 – Just order by 3pm and choose the appropriate service in the list of shipping options in your basket. We also offer great shipping prices worldwide on all items using DHL services for fast and secure delivery of your items.
† Mainland UK only. Charges and delivery duration for Scottish Highlands, Scottish/Western Isles, Northern Ireland and other Islands will be higher.
The obvious choice for the indoor season...
This is a cracking aircraft, it is precise and flys very slowly. It is fairly robust and easy to repair should the need arise. Building is straightforward, probably a couple of evenings and there are no particularly tricky bits. All necessary hardware is included and the instructions are clear too. I used cyano to build mine, but I suspect for much of the build you could substitute UHU if you prefer. Oh, and it will do some 3D too :) It's the obvious choice for the indoor season!
Write a review