One pair of red polarised Deans 4-pin Micro Plugs (4B) including heat-shrink as shown. These are genuine Deans connectors from the USA. You will find that they fit together considerably better than the clones.

Tips: -
– Use a 40 watt soldering iron, with a 1/8" tip
– Put a single piece of heatshrink onto each wire
– To avoid damage from overheating, insert the mating plug before soldering
– Strip wire 3/16" and pre-tin
– Pre-tin pins (offset end of male plug)
– Lightly clamp in vise (or use pliers with a rubber-band) and solder carefully (note polarity)
– Slide heatshrink tubing over solder joint and apply heat to shrink

WS Deans part 1242.

£2.00 ex. VAT     £2.40 inc. VAT
temporarily out of stock
Enter your email address to be notified when stock arrives!

Email Me
same day despatch if you order by 3pm mon-fri
© 2008-2020 electricwingman Ltd, United Kingdom