The new Slick SuperLITE has been developed by world air games competitor and leading indoor pilot Jan Spatny and represents a new take on the side-to-side thrust vectoring design of the existing Edge 540 v3 SuperLITE. The stock servo setup includes 3 servos for a traditional R/A/T/E setup, but add the optional fourth servo and create a mix with rudder or use an additional proportional control on your transmitter and you can do anything you can think of with this plane! Its lightweight 4mm EPP construction means it has flying quality associated with the best that milled depron has to offer, while being much much stronger and less susceptible to spontaneously turning into confetti at the sight of another indoor model in your local sports hall.
The recommended power set uses the higher kv AT2204 motor (2200kv) with 2s and a tough 8×4 propeller. We do not recommend the GWS slow fly propellers with this setup due to the relatively high RPM, especially if you setup the plane with the sideways thrust vectoring.
The wingspan is a convenient 830mm (Just under 33 inches) which is big enough to make it floaty when required but not too big to go in the car. Construction will be relatively easy for anyone who has built a Twisted Hobbys or RC Factory plane before. Medium CA and kicker is recommended. UHU Por can be used if preferred although some people prefer not to use it on the carbon fibre bracing. Please do not use Foam-Safe cyano.
Recommended equipment: -
- 2204 size motor
- 10-15 amp ESC to suit
- 8 inch propeller to suit
- 3 × 6g servos (Plus an extra if you want to use the thrust vector setup)
- 300-450mAh 2s Li-Po battery
Download the build instructions here (PDF)
Next-day UK delivery† with a one-hour window (Communicated by SMS or Email) is available for £5.95 on all our model aeroplane kits and accessories above £41.95. Just order by 3pm and choose the appropriate service in the list of shipping options in your basket. We also offer great shipping prices worldwide on all items using DHL and Royal Mail services for fast and secure delivery of your items.
† Mainland UK only. Charges and delivery duration for Scottish Highlands, Scottish/Western Isles, Northern Ireland and other Islands will be higher.
Technical Details for RC Factory Slick SuperLITE 32"
|Model Type||Indoor 3D & Aerobatic|
|Build Time||3-6 hours|
|Recommended Power||T-Motor AT2204 2200kv|
|Servos||3 x 6g|