A massively powerful 69 gram brushless outrunner with short shaft and bolt-on prop driver for aerobatic models up to about 850 grams or 3D models up to about 750 grams. This is the ideal motor for the Big Crack Beaver from Twisted Hobbys but is equally at home in many similar models up to about 44 inches in wingspan. It is happiest on 3s with 9-10" propellers (we recommend only short bursts of full throttle when using 10 inch props) and can just about take a 30 second burst of full power and 40 amps. We would usually recommend something like a 10×3.8 on 3s with a 30-40 amp ESC. Careful throttle management with a 30 amp ESC helps to keep your plane lighter.

Please note that this motor has a shortened internal shaft for reduced weight. A bolt-on prop driver is included along with a cross mount, so this motor is ideal for mounting in the likes of the bigger Crack Beaver and similar models where the motor must be bolted directly on to the front of a firewall rather than behind the firewall.

Included: –

  • 1 x Genuine X2216-III 1250kv brushless outrunner
  • 1 x Cross mount
  • 1 x Bolt-on propeller driver

Male 3.5mm gold bullet connectors have been soldered to the 3 motor wires already for quick installation in your plane.

Technical Details for SunnySky X2216-III 1250kv Brushless Motor

Weight20.0g (0.7oz.)
$25.06
$30.06 inc. VAT
Based on base price of £22.95 inc. VAT
in stock
Add to basket
Total shipping price if this item is added from $7.87 to $21.61
Shipping Options
same day despatch if you order by 3pm mon-fri
contact
email: info@electricwingman.com
contact
other
b2b
links
© 2008-2018 electricwingman Ltd, United Kingdom