News Terms & Conditions Privacy Policy Pricing Policy Friends
A range of Balance adaptors & cables suitable for connecting various batteries to various chargers, covering a wide range of balance taps. If you are unsure, please contact us for assistance.
2-cell JST-XH balance plug complete with three wires.
Useful for producing your own balance lead on home-made battery packs with two-cells.
Simp…
This is a small adaptor lead allowing PolyQuest/Enerland LiPo and A123 batteries to be charged with chargers accepting JST-EH balance taps.
The sho…
A short and convenient adaptor cable allowing a 2-cell PQ type balance tap to be connected to a 2-cell JST-XH socket.
Compatible with all 2-cell Po…
3-cell JST-XH balance plug complete with four wires, 200mm in length.
Useful for producing your own balance lead on home-made battery packs compris…
This is a small adaptor lead allowing 3-cell PolyQuest/Enerland LiPo and A123 batteries to be charged with chargers accepting JST-EH balance taps.
...
A short and convenient adaptor cable allowing a 3-cell PQ type balance tap to be connected to a 3-cell JST-XH socket.
Compatible with all 3-cell Po…
4-cell JST-XH balance plug complete with five wires.
Useful for producing your own balance lead on home-made battery packs with four series-wired c…
This is a small adaptor lead allowing 4-cell PolyQuest/Enerland LiPo and A123 batteries to be charged with chargers accepting JST-EH balance taps.
A short and convenient adaptor cable allowing a 4-cell PQ type balance tap to be connected to a 4-cell JST-XH socket.
Compatible with all 4-cell Po…
5-cell JST-XH balance plug complete with six wires.
Useful for producing your own balance lead on home-made battery packs containing 5 series-wired…
This is a small adaptor lead allowing 5-cell PolyQuest/Enerland LiPo and A123 batteries to be charged with chargers accepting JST-EH balance taps.
A short and convenient adaptor cable allowing a 5-cell PQ type balance tap to be connected to a 5-cell JST-XH socket.
Compatible with all 5-cell Po…
6-cell JST-XH balance plug complete with seven wires.
Useful for producing your own balance lead on home-made battery packs containing 6 series-wir…
This is a small adaptor lead allowing 6-cell PolyQuest/Enerland LiPo and A123 batteries to be charged with chargers accepting JST-EH balance taps.
A short and convenient adaptor cable allowing a 6-cell PQ type balance tap to be connected to a 6-cell JST-XH socket.
Compatible with all 6-cell Po…
This is the Bantam Balancing board for Align and DualSky (JST-XH) balance taps, compatible with Bantam BC5, BC6, BC6-10 and PB6 chargers, suitable f…
This is the Bantam Balancing board for Kokam and Graupner balance taps (JST-EH), compatible with the Bantam BC5, BC6, BC6-10 and PB6, for 2-6s….
Adaptor board allowing balancing of battery packs using a PolyQuest type balance tap connector when using compatible Bantam chargers.
This adaptor …
This is the Bantam Balancing board for FlightPower, ThunderPower and Multiplex balance taps, compatible with Bantam BC5, BC6, BC6-10 and PB6 (2-6s) ...
This is a balance board to allow two 3s packs or three 2s packs using the JST-XH balance tap standard to be balanced via Bantam BC6 and BC6-10 charg…
This is a balance board to allow two 3s packs or three 2s packs to be balanced via Bantam BC6 and BC6-10 chargers.
This adaptor board is compatible…
This board is compatible with th…
This board is compatible with ba…
10mm 0.5mm² wire with Deans Male plug and JR plug. This lead converts a Deans Female plug to a JR type plug.
Ideal to convert your receive…
Cable allowing two battery packs to be connected in parallel.
Only use this cable with identical battery packs to double the effective capacity wit…
Cable allowing two battery packs to be connected in series, to increase the effective voltage.
Only use this cable with battery packs of identica…
Adapter lead to allow the connection of 5s FlightPower battery packs to chargers using the JST-XH connector standard….
This Graupner balance adaptor set allows connection of lipo batteries using the PolyQuest/SharkPower/JST-XH/ThunderPower/FlightPower balance plug stan…
A selection of balance adaptor boards allowing balancing of batteries with 2-7 cells.
This selection of boards supports the following balance taps:...
A balance adaptor board for Graupner chargers allowing two 2s or two 3s battery packs (2×2-3s) to be balanced simultaneously as a 4s or 6s pack.
In…
Balancer adapter XH, TP / Graupner, 2 × 2 – 3 cells For simultaneous charging of two packs of 2 – 3 cells (XH, TP) in series….
The Graupner EH balance adaptor is an adaptor board for 2-14 cells. This board is suitable for batteries between 2s and 14s, where only one balance ta…
Graupner balance adaptor board for Graupner-EH balance tap connectors. This unit is compatible with Graupner Ultramat and Duo chargers and supports ba…
Graupner balance adaptor board for JST-XH balance tap connectors. This unit is compatible with Graupner Ultramat and Duo chargers and supports batteri…
This adaptor board allows lipo battery packs fitted with balance plugs adhering to the JST-XH standard to be connected to any of the following Graupne…
This Graupner balance adaptor set allows connection of lipo batteries using the PolyQuest balance plug standard (Enerland, E-Tec, SharkPower) to any o…
The Graupner PQ Balance Adaptor for 2-7 cells is a balance adaptor board to allow balancing of batteries using the Polyquest balance tap standard (Ene…
This adaptor board allows lipo battery packs fitted with balance plugs adhering to the ThunderPower/FlightPower standard to be connected to any of the…
Graupner balance adaptor board for FlightPower/ThunderPower battery packs of 2-7 cells.
This unit comes with leads suitable for balance sockets for…
10mm 1.5mm² wire with MPX Female and Deans Male plugs.
Ideal to convert your receiver battery with Deans Female plug to MPX, for use with our …
One 10cm lead with MPX plug on one end and JR plug on the other. Used to convert an MPX socket to a JR plug.
This is one lead only.
Powerbox Sys…
This cable allows a 2-cell and 3-cell battery pack using the PolyQuest balance tap standard, to be balanced as a single 5-cell pack.
Useful in situ…
This cable allows two 2-cell battery packs using the PolyQuest (JST-PQ) balance tap standard to be balanced as a single 4-cell pack.
This cable allows two 3-cell battery packs using the PolyQuest balance tap standard to be balanced as a single 6-cell pack.
Useful in situations wh…