The AXi 2826/12 Gold Line brushless outrunner electric motor with neodymium magnets and rotating case is manufactured using advanced technologies from the finest materials. The 2826/12 has 14 poles.
The hardened steel shaft is supported by three ball bearings and the robust but lightweight construction ensures a long service life. The unique design of this motor gives extremely high torque and efficiency, allowing rotation of large propellers without gearing.
This motor is a good match for the E-Flite DHC-2 Beaver 25e.
The optional radial mount set includes: mounting flange, propeller adaptor, securing collar, and screws.
Included in the box: -
- Model Motors AXi 2826/12 Motor
- Manual
- Mounting template
Not included with AXi 2826/12: -
- Optional Radial Mount Set (RMS2820)
- Optional prop holder (PH5)
Other AXi motors in this series:
AXi 2826/08PG, AXi 2826/10, AXi 2826/12 Short-Shaft, AXi 2826/6, AXi 2826/8
Do not exceed the recommended propeller sizes.
powerful! - By trev
Fitted an AXI 2826/12 in a New Power Modelisme Extra 330s, flies very nicely indeed!
using the following components
- AXI 2826/12
- 4s Lipo
- Jeti advance plus 40
- 14"x7 APC thin electric prop
High Flying with the AXI 2826/12 - By Phil
I installed the AXI 2826/12 in my Multiplex Cularis sailplane and the performance was out of sight. Originally I had the stock power system in my sailplane and when I replaced it with the AXI 2826/12 I was able to climb to altitude in half the time. In fact, I was able to do verticle climbs to the point where the Cularis became a tiny speck and I had to back off the throttle for fear of loosing visual contact. I used a 4 cell 3000mah Lipo battery to power up the motor and it preformed flawlessly. In my humble opinion, the AXI motors are built tough and the craftmanship is beautiful. If your looking for style and performance then look no further because this motor will out perform all that follow.
Best regards,,, Phil
Write your own review of this item.