The AXi 2204/28 is a new brushless motor with rotating case (outrunner) from Model Motors. Made in the Czech Republic, this light-weight outrunner is designed for operation on 2s/7.4V Li-Poly batteries and provides excellent and quiet power with 8"x3.8" slow fly propellers, such as those from APC, in 3D models up to 250g and aerobatic models up to 300g. The 5.5mm nose of this motor and the included adaptors mean you can fit APC slow-fly or GWS slow-fly propellers.
The hardened steel 3.17mm shaft is supported by two ball-bearings and the built-in prop saver provides protection for your propeller and the motor shaft in case of unplanned landings. The built-in mounting lugs allow simple mounting on your model with suitable screws.
This is our choice for the RC Factory 800mm models such as the Edge 540, Sbach and Crack Yak. With an 8×3.8 Slow-Fly type propeller and 2s Li-Poly battery from 350mAh-450mAh for maximum performance both indoors and outdoors.
Made in Czech Republic.
Other AXi motors in this series:
AXi 2204/54, AXi 2204/54 EVP
Do not exceed the recommended propeller sizes.
Always use slow-fly type propellers with AXi 22xx series motors.