Deans Micro Plug Pair - Non-Polarised, Black

One pair of black non-polarised Deans Micro Plugs (2NPB), complete with heatshrink. Genuine Deans product.

Tips: -
– Use a 40 watt soldering iron, with a 1/8" tip
– Put a single piece of heatshrink onto each wire
– To avoid damage from overheating, insert the mating plug before soldering
– Strip wire 3/16" and pre-tin
– Pre-tin pins (offset end of male plug)
– Lightly clamp in vise (or use pliers with a rubber-band) and solder carefully (note polarity)
– Slide heatshrink tubing over solder joint and apply heat to shrink

WS Deans part 1225.