Jeti Spin speed controller settings for AXi motors

Please find below information on the correct settings to use with Jeti Spin controllers and AXi motors.

  • Use AUTO SETUP and choose Mode 2 outrunner for optimal basic settings
  • If fine tuning of your power system is required, use Manual Setting with the following options:
    • Timing: 24°
    • Frequency: 8kHz
    • Number of Poles: 14 (see note)
  • Other parameters can be set according to your requirements. Please ensure the Jeti Spin instructions are followed at all times.
  • For the AXi 2217/5H set the number of poles to 8. All other AXi motors have 14 poles.

When using Castle Creations speed controllers, the timing should be set to high advance.

contact
email: info@electricwingman.com
contact
other
b2b
links
© 2008-2020 electricwingman Ltd, United Kingdom