The iCharger 206B is a 300W battery balance charger for charging A123, Lithium Polymer, Lithium Ion, NiMH, NiCd and Pb batteries. The iCharger range of battery chargers from Junsi are renowned for their wealth of features and efficient DC conversion, which reduces heat build-up and allows for a small form-factor. An accurate and relatively high-powered balancing circuit tops off an impressive feature list, which includes a pack cycle program.
The iCharger 206B supports 1-6 Li-Poly and A123/LiFePO4 cells. In non-balance charge mode, the iCharger 206B can charge up to 8 cells LiFePO4.
Please note balance boards are not included but are available separately. When purchasing the separate balance boards for your iCharger 206B, dont forget to also add the lead to connect the board to the charger.
See below for full specifications.
Made in China.
Technical Details for iCharger 206B
Input Voltage Range (DC) | 10-28.0 |
Mains Operable | No |
Dimensions (mm) | 134x83x25 |
Max. Charge Current | 20.0A |
Max. Discharge Current | 20.0A |
Max. Charge Power (W) | 300 |
Max. Discharge Power (W) | 20 |
Balancing Current | 0.4A |
Lithium cell count (LiPo, LiIo, LiFe) | 1-6 |
NiCd/NiMH cell count | 1-17 |
Pb cell count | 1-12 (2-24V) |
Weight | 350.0g (12.3oz.) |
Great for parallel charging
By wot 4
Now that the weather is with us, I am using my 206b daily to parallel charge all my wot 4 batteries. I can have them done in less than an hour and then fly for over an hour.
Great charger with lots of settings to play with.
Write a review