Jeti Duplex 2.4EX MUI 30 sensor

The Jeti Duplex MUI 30 is a voltage and current telemetric sensor, compatible with all Jeti Duplex receivers, suitable for measuring currents up to 30A and voltages up to 60V.

This sensor should be connected between the power systems battery pack and the speed controller, in order to provide a pass-through to measure the current draw of your power system. Being the smallest and lightest volts/amps sensor in the MUI range, the MUI 30 is also ideal to monitor the power consumption of your receiver and servos. Alarms can be configured for: -

• Low voltage
• High amps
• Consumed capacity (mAh)

Two additional wires are used to measure pack voltage.

Using this sensor it is possible to view in realtime, the current pack voltage, the motor run time and the capacity drawn from the flight battery.

An audible alarm can be configured via the Jeti Box to provide an alert when the flight battery voltage drops below a configurable minimum or when the current draw exceeds a configurable maximum.

Please note, the maximum current capability of this sensor is 30 amps. This sensor is not required to view the voltage and other metrics associated with the receiver system, which is provided by all Duplex receivers, without the need for an additional sensor.