AXi 5345/16HD v2

New AXi 5345/16 HD version 2 motor with improved cooling and prop adaptors for front and reverse mounting. These v2 motors are the culmination of over 15 years experience producing some of the finest brushless motors available in their factory in Europe. The rotors are now factory balanced by a computer and the thermal dissipation has been greatly improved for more efficient operation. The 5345/16HD v2 is suitable for slow flying models up up to 10kg/352oz.

The 5345/16 is generally used for 10s setups on slow flying models like large vintage planes or cubs up to 10,000g on 10s with 22×10 propellers or in 3D models up to 7,000g/247oz with 24×12 propellers. This motor is also suitable for aerobatic models up to 8,500g/300oz using 10s and 22×12 propellers.

The internal motor shaft is 10mm with an 8mm ending and the included prop mounts have a 12mm shaft for safely mounting your propeller.

Recommended for use with the HobbyWing FlyFun 110 for 6-14s. Use good quality wood or carbon-fibre propellers for best performance.

Motor holder and stand off mounting rods are available separately.

Made in Czech Republic.