PowerLog 6s

PowerLog 6s is a complete measurement and monitoring solution for your electric power setup; supporting voltage and current measurement and logging for later analysis using LogView software (included on the CD), with built-in 16Mbit storage.

The PowerLog 6s device is a small light-weight device with many features (see below) and has a clear LCD screen with back-light.

PowerLog 6s features: -

• Bi-directional current sensor using 0.2mΩ current sampling resistor
• Single channel 0-60V volts measurement. 6-channel cell voltage measurement. Supports not only 1-6s Li-Po, NiMH, NiCd or Pb voltages but also 6-channels from 0.05-28 volts
• 4-channel temperature measurement: Single-channel internal temperature and 3 external channels.
• Optical Propeller RPM measurement with user-adjustable blade count
• PWM signal measurement: frequency, period, pulse width, duty cycle. Applicable to remote control channel signals.
• Manual and auto mode PWM output. Auto mode is able to break-in your servos or drive your ESC and RC switches.
• Motor KV measurement (2-wire and 3-wire mode). The 2-wire mode is suitable for measuring the RPM/V of your brushless motor, whereas the 3-wire mode is suitable for the KV measurement of either brushed or brushless motors.
• Can be used as a voltage, current, capacity, temperature or RPM alarm. The extra alarm output can be used to drive external devices.
• 8 sets of monitoring alarms, which can be selected depending on your battery pack.
• All PowerLog 6S units are 100% factory-calibrated, but can be manually calibrated by the user
• User-configurable logging interval
• Can be upgraded using the included USB cable (plug-and-play)
• Full LogView support (For LogView software please see www.logview.info)

The following items are included with your PowerLog 6s: -

• 1 x PowerLog 6s
• 1 x USB PC connection cable
• 1 x CD-ROM with user manual
• 1 x Alarm output wire
• 1 x Brushless motor KV measurement wire
• 1 x T-Plug (Deans style) female pig-tail
• 1 x T-Plug (Deans style) male pig-tail
• 1 x Temperature sensor cable
• 2 x T-Plug protectors