• Recently viewed items: -
  • international express delivery We offer International Express Shipping with DHL Express
  • SAME DAY DESPATCH Order before 3pm Monday-Friday for same day shipping
  • paypal accepted

New stronger and more powerful Navigator series motors with improved cooling, dust resistance, waterproofing and temperature resistant windings. Available in 240,300 and 360kv




MN501-S box and contents

Among as number of new entrants in the T-Motor Navigator range is the MN501-S series motors which are available in a number of RPM/V configurations to provide from approximately 900g up to over 5,000 grams of thrust. The new Navigator™ design provides borrows a number of features from the premium U-Power range and some developments from T-Motor's ever-evolving lineup of FPV motors. The most striking change here is the more enclosed build, providing much better protection against dust and water ingress, which also incorporates a centrifugal fan, to draw air up through the motor and improve heat dissipation and overall cooling. Secondly, the new approach to winding motors with a high-temperature resistant windings gives more protection from burn-out caused by trapped propellers and other mishaps. There are not only important internal changes and external design changes, but the internal T-shaped shaft is now fixed with a clip and a screw to provide extra resilience, strength and reliability under load without developing a loose rotor.

MN501-S motors are designed for aerial photography platforms, monitoring systems and mapping/surveying aerial vehicles. These motors are compatible with T-Motor carbon-fibre propellers both fixed and folding.

Setup recommendations

KV Li-Po ESC Propeller Max. Thrust
240kv6sAlpha 40 LV/Air 4020-22"Approx. 4.1kg
240kv12sAlpha 60 HV14-15"Approx. 4.6kg
300kv6-8sAir 40/Alpha 60 HV20-22"Approx. 5.2kg
360kv6sAir 4017-18"Approx. 4.6kg

General specifications for MN501-S

This table shows the specifications which are the same, regardless of RPM/V configuration.

Motor size 55.6×33.9mm
Stator material Imported silicon steel sheet with anti-rust treatment and temperature resistant coating
Configuration 24N28P
Shaft Internal: 6mm, External: 4mm
Bearing Imported 696ZZ
Magnets 180°C temperature resistant curved
Cables 150mm 16AWG
Windings 220° high temperature resistant
Coil insulation test 500V
Rotor dynamic balance standard ≤5Mg
Motor dynamic balance standard ≤10Mg
IP Rating IP45

Included in the box for each motor

  • 2pcs M3×10 mounting screws
  • 4pcs M3×8 motor mounting screws
  • 1pcs Prop cover for mounting carbon-fibre propellers from T-Motor

     

Variant specific specifications for all KVs

RPM/V 240KV 300KV 360KV
Idle Current 0.9A@18V1.1A@15V1.4A@15V
Peak Current 25A/180s40A/180s40A/180s
Max. Power 1200W/180s1000W/180s1000W/180s
Internal Resistance 85mΩ63mΩ45mΩ
Weight 170g170g175g
$94.60
Shipped from our UK warehouse

Choose kv

Add to basket


You can adjust the quantity in your basket afterwards



same day despatch if you order by 3pm mon-fri
official tiger t-motor reseller
contact
email: info@electricwingman.com
contact
other
b2b
links
© 2008-2018 electricwingman Ltd, United Kingdom