AXi 5330/24 v2 3D Extreme + Telemetry

Designed especially around 10s Li-Po batteries and 20-22 inch propellers, the 5330/24 is a high-torque 197kv outrunner. The 3D Extreme v2 designation means that this particular variant is designed for radial mounting and features pre-installed probes for Jeti RPM and temperature telemetry for use with MT125 and MRPM-AC sensors (not included). A motor mounting cross is included.

This motor can be used in slow flying, vintage style, aerobatic and F3A models on 10s setups. For slow flying models up to approximately 8.5kg, use a 22×10 propeller on 10s with a minimum 90 amp ESC. For aerobatic performance, you may use a 21×14 propeller in models up to 6kg and for high-performance pattern planes up to 5kg, you can use a 22×12 propeller.

Included: -

• 1 x AXi 5330/24 v2 3D Extreme brushless outrunner
• 1 x Back mounting cross
• 1 x Prop adaptor (8mm)
• 1 x Probes for Jeti MT125 sensor
• 1 x Probes for Jeti MRPM-AC sensor

The sensor probes do not need to be connected for proper function of the motor. They are installed for your convenience.

All AXi motors made in Czech Republic.