Phuket Stretch-X Mini Quad

The Phuket mini quadcopter frame is a very light-weight 42g FPV drone for 3" propellers and 1407-1408 size motors like the F20 from T-Motor. Like the larger Tokio frame from the same stable, the Phuket rocks a protective canopy to protect all your gear and keep you in the air rather than in the workshop! This is a very simple and light-weight unibody design with meticulous attention to detail. The canopy mounts on short 10mm standoffs with just 3 screws – it is easy to remove but forms an iron-like cage around your vTx and electronics stack without adding a lot of weight. You can expect and AuW without battery of less than 160g.

The carbon-fibre unibody has chamfered edges and countersunk holes to keep everything smooth and safe. There are mounting holes for 20×20 and 30×30 stacks, giving you some flexibility in terms of gear used.

The canopy is available in black, red, green, blue, grey, purple and white. Please choose the required canopy colour before adding the Phuket to your shopping basket.

Included with the frame: -

• 3.5mm carbon-fibre unibody
• Tough TPU canopy
• 4 x Flat head M3×12mm screw
• 4 x Silicon grommet spacers
• 4 x M3 nylon nuts
• 3 × 10mm hex spacers
• 3 x Flat head M3×6 screws
• 3 x M3×6 screws
• 2 × 3" antenna tubes
• 2 x Antenna caps
• Velcro strap
• Stickers

Recommend flight controller is the Sunrise F4 AiO FC.