TSX-200 Racing Drone Builders Kit

• 1 x Charge Lead for XT60 Connector
• 1 x Stanton Frames TSX200 (3mm)
• 4 x Brother Hobby Tornado T2 2206-2300kv - Temporarily out of stock
• 1 x BlueJay RC F4 Barebones Flight Controller - Temporarily out of stock
• 4 x Spedix GS30 30A BLHeli_32 ESC, 2-4s 32-bit - Temporarily out of stock

This is a builders kit for the Stanton Frames TSX200 build detailed in our guide. Please refer to the individual components listed above to check specific details. Needless to say, these components will give you a nice fast quadcopter when you're done building! The charge lead is included to be used as a pig tail from the PDB for battery connection, so you will need to cut-off the 4mm connectors.

This combo has been kept deliberately sparse, check the boxes to add camera/osd/vtx with antenna and either a 1300mAh 4s or 1550mAh 4s option. The choice of propeller colour is also down to you but size-wise we recommend the ever so sweet HQProp 5×4x3.

Not included (Unless you tick the boxes!): -

• FPV gear
• Battery (1300mAh – 1550mAh 4s recommended)
• Props (HQProp S5×4x3PC recommended)

This is a kit only. Nothing has been pre-assembled! Not recommended for beginners.